Requirements when carrying out a thermographic inspection

Requirements when carrying out a thermographic inspection

For each Inspection zone and Overview zone

✅ Thermal images from radiometric camera [IR] (.JPG) captured during "mapping" mission at the specified GSD

✅ Visual RGB images from wide camera [W] (.JPG) captured simultaneously with "mapping" mission


For each site

✅ Completed flight log document, including irradiance values recorded before and after each flight in .xlsx format 

✅ At least 2 attractive aerial JPG images (RGB) of the site, for our report front cover.  


Here is a list of the requirements documentation whenever collecting data for a thermographic inspection:
  1. Accepted Drone & Camera equipment
  2. Flight & Camera Parametres
  3. Irradiance requirements
  4. Site Photographs
  5. Flight Log
  6. Data Upload

    • Related Articles

    • Site Photographs taken during a thermographic inspection

      Here are the requirements when it comes to Site photographs taken during a thermographic inspection: Capture at approximately 65m (or lower if flight restrictions dictate) Please capture 2-5 photos. Example site images:

    • Steps to take before a Thermographic Inspection

      It is very important to us that we understand your needs and provide you with the most insightful data about your assets. We carry out inspections on thousands of solar plants a year, and our clients have a range of reasons for using our thermography ...

    • Flight & Camera Parametres for a Thermographic Inspection

      This guide applies to the following sensor/drones mentioned in the Approved cameras & drones document. We divide each solar farm into 'Zones' for the purposed of flight planning and data transfer. These are the areas that you will map at a specified ...

    • What irradiance levels should I have during a thermographic inspection?

      The irradiance (nadir - 90° to the module) must exceed 600W/m2 at the time of data capture. Changing weather and cloud cover can mean that irradiance drops below this value. You must be aware of conditions at all times and, if necessary, pause or ...

    • Why has my thermographic inspection data been rejected?

      Above provides clear data guidelines to ensure the highest quality of analysis of each solar plant. Please see the issues below to provide context as to why the data could be rejected. Corrupt files When there is a considerable number of frames that ...