Site Photographs taken during a thermographic inspection
Here are the requirements when it comes to Site photographs taken during a thermographic inspection:
- Capture at approximately 65m (or lower if flight restrictions dictate)
- Please capture 2-5 photos.
Example site images:
Related Articles
Requirements when carrying out a thermographic inspection
For each Inspection zone and Overview zone ✅ Thermal images from radiometric camera [IR] (.JPG) captured during "mapping" mission at the specified GSD ✅ Visual RGB images from wide camera [W] (.JPG) captured simultaneously with "mapping" mission For ...Steps to take before a Thermographic Inspection
It is very important to us that we understand your needs and provide you with the most insightful data about your assets. We carry out inspections on thousands of solar plants a year, and our clients have a range of reasons for using our thermography ...Flight & Camera Parametres for a Thermographic Inspection
This guide applies to the following sensor/drones mentioned in the Approved cameras & drones document. We divide each solar farm into 'Zones' for the purposed of flight planning and data transfer. These are the areas that you will map at a specified ...What irradiance levels should I have during a thermographic inspection?
The irradiance (nadir - 90° to the module) must exceed 600W/m2 at the time of data capture. Changing weather and cloud cover can mean that irradiance drops below this value. You must be aware of conditions at all times and, if necessary, pause or ...Approved cameras & drones: Thermographic
Radiometric stills DJI M4T (Matrice 4 Enterprise Thermal) Recommended for inexperienced partners Smallest, lightest thermal capable drone available. Simple to use, and kit packs into a "carry-on" sized case. "Friendliest" option for new pilots Lower ...