Thermographic Report - Anomaly Groups

Thermographic Report - Anomaly Groups




Health & Safety Impact

Items that may pose an immediate risk or liability to the plants health and safety requirements.


  1. Visibly Damaged Modules
  2. Heated Substrings & Hot Spots
  3. Elevated Hot Spot ΔTm Results
  4. String End Heating Pattern (SEHP) which can be attributable to negative earthing arrangement

Corrective Maintenance Performance Impact

Abnormalities occurring in such frequency or intensity to recommend for plant operators to take immediate corrective maintenance intervention to mitigate observational risks.


  1. Unidentified Heated Modules
  2. Unidentified Heated Strings
  3. Heated Sub & Multiple Sub Strings
  4. Active Bypass Diodes
  5. Heated DC Junction Boxes
  6. Tracker Mis Alignments

Preventative Maintenance Performance Impact

Abnormalities occurring in such frequency or intensity to recommend for plant operators to schedule observational risks into the preventative maintenance plan for additional inspection & testing.


  1. Unidentified Hot & Multiple Hot Spots
  2. Heated Modules secondary to CM classifications.
  3. Overtightened Clamps
  4. Minor soiling or vegetation growth
  5. Surface Scratches

Low Effort / High Return Impact

Relates to items when actioned result in measurable improvements to plant performance for the low effort typically required to rectify these items.


  1. Module Cleaning
  2. Landscaping
  3. Inter Row Shade Impacts
  4. Interior Object Shade Impacts
  5. Exterior Plant Shade Impacts

Warranty Claim

Items displaying observational patterns typically associated with defects covered by industry standard manufacturer terms and conditions. Asset Owners should contact Above for support with dedicated remediation planning. 



  1. Delamination
  2. Bus Bar Corrosion & Hot Spots
  3. Heated Sub Strings
  4. Heated Junction Boxes
  5. Heated Hypercells


    • Related Articles

    • Thermographic Report - Anomaly Types and Root Causes

      Heated Module A module showing anomalous heating across the entirety of its surface. Heated modules can have an intrinsic root cause, or heating can occur secondary to an extrinsic root cause. A common extrinsic root cause is 'string heating', where ...

    • Thermographic Report - Survey Compare

      Introduction The Survey Compare tool enables you to: Compare up to 3 inspections Have a high-level anomaly comparison Look at the evolution per module Get a detailed breakdown for each status The Survey Compare page has been designed to match the ...

    • Thermographic Report - Advanced Power Loss Estimation

      The sophisticated Power Loss Estimation feature available on SolarGain enables you to: Better understand the impact anomalies found during thermal inspections have on the performance of your solar site Focus on solving issues on the lowest performing ...

    • Thermographic Report - Glossary

      Acronym/Jargon Explanation AGL Above ground level (Altitude) ATL Above take-off level (Altitude) CAD Computer-aided design [document] Here, generally used to refer to schematic drawings of the layout of a solar plant. Delta-Tm (ΔTm) The measured ...

    • Visual Evidence Report

      List of Reports There are 2 ways to find the visual report in SolarGain. Open the list through the project Dashboard Open through the Left-Hand Navigation Bar Filter the list of reports The user is able to filter the list of reports by combining ...